Сложность
Moderate
Шаги
2
Необходимое время
Нет оценки
TR8 Torx Security Screwdriver
Remove the single 5.3 mm T8 screw securing the SSD to the logic board.
To avoid damaging its socket, do not lift the end of the SSD excessively.
Lift the end of the SSD up slightly and pull it straight out of its socket on the logic board.
When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.
To reassemble your device, follow these instructions in reverse order.
Участник c: 17/10/09
509820 Репутация