Введение

Prerequisite-only guide to remove the hard drive tray before removing the logic board.

Инструменты

  1. HlyFX1SKeB5XaS1A
    • Remove the 7.3 mm T8 Torx screw securing the hard drive tray to the rear enclosure.

  2. WHcOrWobQNNZeior
    WHcOrWobQNNZeior
    dPAqvkcXmGpQwMvq
    • Remove the SATA cable from the clips on the back of the hard drive tray.

    • Remove the hard drive tray.

Заключение

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

Участник c: 11/04/15

211971 Репутация

0 комментариев