Zenithink ZTPAD ZT280 C91 Back Panel Replacement

Автор: Nicholas Davis
  • Комментарии: 0
Zenithink ZTPAD ZT280 C91 Back Panel Replacement

Сложность

Easy

Шаги

2

Необходимое время

1 - 2 минут

Введение

Before you begin this guide, make sure to have the proper tools. You will need a spudger, and a phillips head #00 screwdriver. If you're having trouble with the battery in your device, removing the back panel is one of the first steps in replacing the battery.

  1. RlFagdAehwjopZqk

    • Remove the two screws on the bottom using a Phillips #00 screwdriver.

    • For differentiation purposes, these screws are 4mm long.

  2. LCdXYb2rPWsRodtm
    LCdXYb2rPWsRodtm
    WfE5cobJL2yiLxdB
    DgswXUx2LnQvTKZA

    • Using a spudger, start prying the case apart by working around the edge slowly.

    • Be careful not to damage any of the latches that hold the back panel in place, especially if you are using a metal spudger.

    • While prying, be careful to not lose the power and volume buttons; the case is the only thing holding them in place so they will easily come out once the panel has been removed

    • Be careful to not damage the speaker cables, they will still be connecting both panels.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Nicholas Davis

Участник c: 21/09/18

345 Репутация

0 комментариев