Zenbre SoundBank Z3 Bottom Cover Replacement

Автор: Cherian Thomas
  • Комментарии: 0
Zenbre SoundBank Z3 Bottom Cover Replacement

Сложность

Moderate

Шаги

3

Необходимое время

2 минут

Введение

This guide is designed to take out a Zebra SoundBank X3 speaker grill and replace it with a new one. Use the Essential Electronics Toolkit, iFixit Opening Tool, and the 64 Bit Driver Kit to perform the repair.

Инструменты

  1. iW2e4P5ngZACBsRp
    iW2e4P5ngZACBsRp
    hAmGA5BlfpGjYFAH

    • Power off the SoundBank Z3.

    • Turn over the device.

    • Peel the silicone feet up to remove.

    • No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.

  2. nRARI5bJccdKDNoi

    • Remove all eight of the 11 mm Phillips screws from the bottom of the device.

  3. p4IaEujtU3SgmC4n
    p4IaEujtU3SgmC4n
    hhgRvEFjvbQS5YQe

    • Remove the bottom panel speaker using an iFixit opening tool.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Cherian Thomas

Участник c: 25/03/16

334 Репутация

0 комментариев