Wen 2307 Front Panel Replacement

Автор: Sergio Palacio
  • Комментарии: 0
Wen 2307 Front Panel Replacement

Сложность

Easy

Шаги

5

Необходимое время

3 - 5 минут

Введение

This guide is mandatory in order to replace other parts of your rotary tool.

Инструменты

  1. skEMWKMOu2MNrLAV

    • Unscrew the locking sleeve.

  2. FkWQdAgIBd1gwCqK

    • Remove the hanging clip.

  3. afJPUm6WITsGI1eE
    afJPUm6WITsGI1eE
    fn1OUSRIO2DxKuGa

    • Unscrew the six 8mm PH2 screws.

  4. 2EGrMcBLsQ5iSnPN

    • While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.

  5. WTj1SH1pmWKAYUJl

    • To remove the front panel, pry the device apart while holding the device with the other hand.

    • The front panel should come out easily.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Sergio Palacio

Участник c: 08/02/16

437 Репутация

0 комментариев