Visual Land Prestige Elite 7Q Digitizer / Front Screen Replacement

At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.

Wedge a plastic opening tool into the edges of the tablet to pry it open.

Wedge a curved metal spudger under the speaker in order to remove it.

Use a Phillips #000 screwdriver to remove the two 3.6mm screws.

Use a plastic opening tool to lift the black tab.

Carefully lift and remove the ribbon cable from the black tab.

Use a plastic opening tool to remove the camera.

Use a Phillips #000 screwdriver to remove the 3.6mm screw.

Lift the tape holding down the battery.

Wedge a plastic card underneath the battery to remove it.

Use a plastic opening tool to lift the black tab.

Carefully lift and remove the ribbon cable from the black tab.

Use a plastic opening tool to lift the black tab.

Safely remove the battery and motherboard from the tablet.

Lift the tape on the sides.

Use a Phillips #000 screwdriver to remove the three 2.5mm screws.

Wedge a metal spudger underneath the LCD screen to remove it.

Replace the front screen to replace the digitizer.