Введение

Removing the back may be the easiest thing to do, however do not forget about the screws hidden under the rubber foot pads!

  1. tjAoNDvXqnRc52AI
    tjAoNDvXqnRc52AI
    P3hyiwkXjdqoBIYY
    • Remove the 2 rubber foot pads from the bottom (opposite the hinge) with the small Plastic Opening tool.

  2. MIWQRqhRwDyQWtxo
    MIWQRqhRwDyQWtxo
    WOfnMkYrT1nKAdCR
    • Remove the 10 7.1 mm screws using Phillips #1 screwdriver.

  3. TBsqDRe3AXDsiPTY
    • Loosen the back cover by using a plastic opening tool all the way around the device.

    • There are areas all along the sides of the device that help aid in this.

    • Be careful when prying, and go slow. The silver plastic frame around the dull gray plastic bottom is fragile and easily dented from prying pressure.

    I have the UK model and I found Fascinating Captain’s method for removing the back cover to be simplicity itself:

    https://www.youtube.com/watch?v=JcZ711cx...

    Rob Butler -

  4. Nv6SXDZGMOZMeOmT
    Nv6SXDZGMOZMeOmT
    NTMmKP62dOsTMqda
    • Remove the back cover by gently lifting up on one side of the device.

    • The easiest side to lift up on is the one with the removed rubber foot pads.

Заключение

To reassemble your device, follow these instructions in reverse order.

Jillian Thomas

Участник c: 14/10/17

209 Репутация

0 комментариев