Введение
If Spin Master Boxer’s screen is cracked, follow this step by step guide to replace it. You will need a Size 00 Philips Screwdriver to complete guide.
Инструменты
-
-
Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.
-
-
-
Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.
-
-
-
While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.
-
-
-
Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.
-
Заключение
To reassemble your device, follow these instructions in reverse order.
think you i can fix
Darren Davis -