Sony DVP-FX730 Cover Replacement

Автор: Rogelio Garcia
  • Комментарии: 0
Sony DVP-FX730 Cover Replacement

Сложность

Easy

Шаги

4

Необходимое время

5 минут

Введение

To access the internals of the Sony DVP-FX730, the cover must be removed. If there is a problem with one of the components on the cover, it may need to be replaced. A screwdriver should be used to remove screws and rubber feet to remove the cover successfully.

  1. MxZBHasVeyxTJBYL

    • Remove the five exposed 7.9 mm screws using a Phillips screwdriver.

    • Punch through the warranty sticker with the spudger.

    • Remove the screw underneath with the Phillips screwdriver.

  2. lZxjSvCoWm2XFKOm

    • Remove the rubber feet using the spudger.

    • Remove the screws that were covered by the rubber feet.

  3. AVWgyiIjyeEQDVBr

    • Hold on to the corners of the cover and gently lift the cover.

    • The tray is still connected to the base with wires.

  4. 2xUjXfWDYcJUr3UG

    • Gently remove the wires with tweezers by pulling up on the base they are attached to.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Rogelio Garcia

Участник c: 20/01/12

22 Репутация

0 комментариев