Roborock S7 Max Ultra Main Brush Cover Replacement

Автор: Sebastian
  • Комментарии: 0
Roborock S7 Max Ultra Main Brush Cover Replacement

Сложность

Very easy

Шаги

2

Необходимое время

30 секунд

Введение

This guide details how to remove and replace the main brush cover on the Roborock S7 Max Ultra robotic vacuum cleaner. Follow these steps to ensure proper maintenance and optimal performance of your device.

  1. YJg1AhJO1ww6xw5X
    YJg1AhJO1ww6xw5X
    t2GUZbf1IRWqkYOl

    • Lay the device on its back to access the underside.

  2. FBsZRK3yZVGRXCnC
    FBsZRK3yZVGRXCnC
    JbUMDuR6whvQZFb5

    • Remove the main brush cover by pressing the two small latches and pulling the cover off.

    • When reassembling, ensure the notches on the top side of the frame are properly aligned and seated.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Sebastian

Участник c: 19/08/18

29252 Репутация

0 комментариев