Введение

The hook and loop can wear down over time, which is completely normal due to constant use. The replacement parts for this guide can be easily purchased.

Инструменты

  1. 3eNeKnjQHYbkrmXS
    • Flip the sander on its side to expose the bottom.

  2. GCbpJmJkOgNeHDRg
    • Remove the four 2.5 mm Phillips #1 screws with the flathead screwdriver.

  3. jL6mZKt6QMRpfyHg
    • Remove the hook and loop backing pad from the sander.

Заключение

To reassemble your device, follow these instructions in reverse order.

Luke Stokes

Участник c: 16/01/19

464 Репутация

0 комментариев