Removing the Rear Access Panels in the Ulco Integrus PSV

Автор: Jake Lane
  • Комментарии: 0
Removing the Rear Access Panels in the Ulco Integrus PSV

Сложность

Moderate

Шаги

2

Необходимое время

4 минут

Введение

Removing the rear access panels will provide access to the battery and o-rings. Make sure all power is disconnected before beginning this process to ensure safety.

For more information on removing the rear access panels, please refer to page 11 (section 4.4.2) in the service manual.

NOTE: Screw types and lengths are not specified in the manuals

Инструменты

  1. vrYFSFMa12hPJR1u

    • Remove the rear plastic cover by turning the single hex key retaining clip to free the cover.

  2. 2XQGvbvHHlWpGUZM

    • Remove the four screws mounted to the cover plate using a 4mm Allen key.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Jake Lane

Участник c: 22/04/19

489 Репутация

0 комментариев