Protocol Videodrone AP Propellers Replacement

Автор: Serge
  • Комментарии: 0
Protocol Videodrone AP Propellers Replacement

Сложность

Easy

Шаги

3

Необходимое время

4 - 5 минут

Введение

This guide will be used to replace the propellers. The only tool you will need to use a #0 Phillips head screwdriver.

  1. XmlU2nTHLFNUZLxG

    • Make sure that the drone is powered off

  2. oMmYpaMxaJ15rkSu
    oMmYpaMxaJ15rkSu
    IlMrrKlixGDsDOcF
    BtTVjyaJb12BGAQ3

    • Using #0 Philips head screwdriver, unscrew the four propellers.

    • If screw is stuck in the propeller, turn over and insert the screw driver and pop out the screw.

  3. yQMXRtxg1K3LULJM

    • Take the replacement propeller, and align it with the screw point

    • Screw in the new propellers

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Serge

Участник c: 26/09/17

340 Репутация

0 комментариев