Protocol Vento Propeller Replacement

Автор: Maria Larcomb
  • Комментарии: 1
Protocol Vento Propeller Replacement

Сложность

Very easy

Шаги

4

Необходимое время

2 минут

Введение

This guide will demonstrate how to remove and replace one or more propellers on the Protocol Vento drone. You will need the small, silver prying tool that is included in the Protocol Vento drone kit.

Инструменты

Запчасти

  1. DtErloCGXCFR25bt

    • Grasp the tail end of the drone where the lip of the battery protrudes.

  2. omKIuD3ZxmKgM6MA

    • Pull away from the drone to remove the battery.

    • Do not attempt any repairs or replacements before removing the battery from the drone.

  3. YM2jBJCduQT22dCp

    • Place a prying tool under the base of the propeller.

  4. LaFtjK6AVswnEWbb
    LaFtjK6AVswnEWbb
    xXRtUB3OZwQCYeP4

    • Use a moderate amount of force to pry the propeller out of its base. The propeller should pop off.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Maria Larcomb

Участник c: 15/02/18

926 Репутация

Один комментарий

Thanks for your help!!

Frank Seifert -