Введение

This guide provides the steps to remove the back cover. This process is necessary to access many of the components inside.

  1. Q1LlhVrXXRipQNLs
    • Locate the bay door for the battery on the left side of the laptop.

  2. h6mfbF2ZDfEn4bdR
    h6mfbF2ZDfEn4bdR
    HLsS2NIP2NZDIW1r
    • Slide the latch to the right and then down to unlock it.

    • Pull out the battery.

  3. FSQbvcfPXo12LNEW
    • Flip the device upside down with the handle facing away from you.

    • Open the optical drive bay by sliding its latch to the right.

    • Locate optical drive release mechanism on the bottom of the laptop.

  4. igiZjJEo3xfOBr5H
    • Slide the latch cover to the right.

  5. ZA6hifMQSLb1YJVx
    ZA6hifMQSLb1YJVx
    ZyKxqZGFUDbb6uOx
    • Push the exposed switch to the left to eject the optical drive.

  6. LQAoluGSYIBSVyYH
    • Begin by turning the laptop upside down with the handle towards you.

    • Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

  7. YNShuNVRHD2kgTMB
    • Remove the panel and set it aside.

    • Use a Phillips size 0 screwdriver to remove these 8 small screws.

  8. olTmDAePCCWkaBTC
    • Use a Phillips size 1 screwdriver to remove the remaining 8 screws.

  9. PoSREVQ5ThVquIdH
    PoSREVQ5ThVquIdH
    Lbuy1HBVxRyhL2LB
    • Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive.

  10. UYMZNkmSyQr5IqNA
    • Be careful when lifting the cover as you may damage some connections.

    • Slowly lift the cover so that you can disconnect the red and white wires connecting the speaker to the sound card.

  11. ULLZQiETLcSKPdi3
    • Now the back cover should be off and you can access the inside of the casing.

Заключение

To reassemble your device, follow these instructions in reverse order.

Rohun Heesen

Участник c: 13/04/10

426 Репутация

Один комментарий

thanks for this crucial tuatorial >

Joe Gutierrez -