Oral-B iO Series 6 Body Replacement

Автор: Ethan Cobb
  • Комментарии: 0
Oral-B iO Series 6 Body Replacement

Сложность

Moderate

Шаги

4

Необходимое время

Нет оценки

Введение

Инструменты

  1. FVK52clAsmAPmXM5
    FVK52clAsmAPmXM5
    aEDRythgTVAmmNmy
    f2BPgZZ1Z5xxjToj

    • Carefully use an opening tool to pry the bottom cap loose.

    • You’ll notice a spring comes out too; be careful not to misplace it.

  2. ln2KdJGXIPpOLDLJ
    ln2KdJGXIPpOLDLJ
    Q2ZT2UrWePVHqPgf
    lWtCk3ibhvbw15Pc

    • Carefully detach the toothbrush head by pulling it off.

    • Attach the replacement head to the same spot where the original head was removed.

  3. bCxsFTyRHjB4STjW
    bCxsFTyRHjB4STjW
    kfPhBRw5lhoHQJTY

    • Carefully remove the metal casing that holds the head and body together.

  4. hilMyTgFV5NMUB6m
    hilMyTgFV5NMUB6m
    tFCusUOPrUkWBcYj
    vXJ4CxLlLsY6juqT

    • Carefully push the internal mechanisms out through the opening left by the removed bottom cap.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Ethan Cobb

Участник c: 19/03/25

459 Репутация

0 комментариев