Makita Jack Hammer HM1203C 2010 Motor Cover Replacement

Автор: Adam O'Camb
  • Комментарии: 0
Makita Jack Hammer HM1203C 2010 Motor Cover Replacement

Сложность

Moderate

Шаги

2

Необходимое время

1 - 3 минут

Введение

Use this guide to remove or replace the motor cover on a Makita Jack Hammer HM1203C 2010.

Инструменты

Запчасти

  1. 1tQ4rEpfJXZA1NYl

    • Make sure the hammer is disconnected from power before beginning any repair.

    • Use a Phillips #2 screwdriver to remove the three screws securing the motor cover.

  2. U2L2NPNyCs62USnK
    U2L2NPNyCs62USnK
    YgbRnmBUVWvwict1

    • Remove the motor cover.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Adam O'Camb

Участник c: 11/04/15

211971 Репутация

0 комментариев