Kenwood KDC-BT362U Front Panel Replacement

Автор: Pablo Cabrera
  • Комментарии: 0
Kenwood KDC-BT362U Front Panel Replacement

Сложность

Moderate

Шаги

5

Необходимое время

10 - 15 минут

Введение

This guide is a prerequisite to getting inside your device for repair. Before any internal parts are replaced, the front panel must be completely removed. This removal allows for access into the device's interior.

Инструменты

  1. AyWsMLwoiTWuqFfD

    • Locate the face-plate eject button.

  2. FyrHDQbARNQx2ZXL
    FyrHDQbARNQx2ZXL
    tDPW4nqxTDEIbTuX

    • Press the eject button with your forefinger.

    • Remove the face-plate.

  3. j3lJAGYwAHCOvDNr
    j3lJAGYwAHCOvDNr
    nsME2qxXF1V3PKHx

    • Starting on the top side, pop the front panel frame out.

    • Remove the face-plate frame.

  4. leEN1Z3aovxNTRGk
    leEN1Z3aovxNTRGk
    3DaVdVXCgW5rQyQt

    • Use the plastic opening tool to pry open the tabs.

    • Repeat on the opposite side.

  5. UMbncD1ixfr2qeWi

    • Remove the front panel.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Pablo Cabrera

Участник c: 04/10/16

201 Репутация

0 комментариев