Huawei Union Motherboard Replacement

Автор: Brittany Achor
  • Комментарии: 0
Huawei Union Motherboard Replacement

Сложность

Moderate

Шаги

8

Необходимое время

30 - 40 минут

Введение

Use this guide if your Huawei Union will not charge when plugged into a charger or begins losing charge faster than previously observed.

  1. L3GsGkQLjEVqOKER
    L3GsGkQLjEVqOKER
    xQ5A5GHKTOU6oxCr

    • Wedge your thumb nail, or the flat end of a spudger, into the bottom left corner and pry off.

  2. NVIts3SZyK1pkMwZ
    NVIts3SZyK1pkMwZ
    OCwPsNcGTmaGMMGY

    • Use the flat end of a spudger, or fingernail, to lift up the battery and pull out.

  3. aESPDpfbPUcPFomG

    • Remove the thirteen 3mm Phillips #00 screws from the back panel.

  4. Y2kf22Ke3QbH2vJe

    • Use the flat end of a spudger to pry off the back panel.

  5. wpCRMPJEV1dDMLRR

    • Remove a single 3mm Phillips #00 screw from the motherboard.

  6. CqYBZbUgatHVjbNy
    CqYBZbUgatHVjbNy
    VweAKxTTtOvIKwx6

    • Using the flat end of a spudger to disconnect the motherboard ribbon cable.

  7. pm6FBUTvV5jOEiOv

    • Firmly hold the second ribbon cable's plastic film cover and pull up to disconnect.

  8. KSq1xuRHx6sn2iGc
    KSq1xuRHx6sn2iGc
    kXZtojvbZlNtJCqk

    • Wedge the flat end of a spudger underneath the motherboard and pry upwards to separate it from the frame.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Brittany Achor

Участник c: 14/02/18

756 Репутация

0 комментариев