Huawei P9 Plus Rear Case Replacement

Автор: Dominik Schnabelrauch
  • Комментарии: 0
Huawei P9 Plus Rear Case Replacement

Сложность

Easy

Шаги

4

Необходимое время

10 минут

Введение

Use this guide to remove and replace the rear case of a Huawei P9 Plus.

  1. rfwQB6Hsx4QExALS
    rfwQB6Hsx4QExALS
    kNvWjeAeEOkSxesl

    • First switch off your phone.

    • Remove the SD and SIM card tray.

  2. CLP6PcycYfHFocK3

    • Remove the two P2 Pentalobe screws on either side of the USB C port.

  3. SnKQsZn3pLHHwbx1
    SnKQsZn3pLHHwbx1
    SYWrUmjlRsVZOkx3

    • Use an iSclack or a suction handle to separate the display unit from the rear case.

    • Do not fully separate the pieces as they are still connected by the fingerprint sensor cable.

  4. gD5ZKKObpLTybubJ
    gD5ZKKObpLTybubJ
    XQfD1RGfnMYC362v
    CXsdZNgYEJyCIV2d

    • After separating the rear case flip the other half open to get to the flex connectors.

    • With a spudger unplug the flex connector of the fingerprint sensor and the one of the side buttons.

    • Remove the rear case.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Dominik Schnabelrauch

Участник c: 23/11/16

234869 Репутация

0 комментариев