Введение
Replacing a kitchen faucet pull-out spray head is affordable and easy for individuals to do on their own. There are many different reasons a person may need to replace their kitchen faucet pull-out spray head. Often times a kitchen faucet pull-out spray head becomes clogged with mineral deposits or the handle on the nozzle breaks. This guide will assist readers in replacing their kitchen faucet pull-out spray head as well as the hose without having to seek assistance from a professional.
-
-
Located underneath the sink is the water-control valve.
-
Shut off the water supply by turning the water-control valve.
-
-
-
Pull on the kitchen spray head nozzle to reveal the connected hose.
-
Unscrew the kitchen faucet spray head nozzle counterclockwise off of the hose assembly.
-
-
-
Remove the rubber gasket from the hose to reveal the c-clip.
-
Remove the c-clip that is located on the pull-out sprayer connection point with a small flat head screwdriver.
-
-
-
Pull on the sink faucet spray head from above the sink to find the main hose connection point to the water line located underneath the sink.
-
Unscrew the hose from the main faucet’s water line connection point.
-
Remove the hose from the sink sprayer location.
-
Connect the new hose by pressing it into the connection point. Then screw hose back on clockwise.
-
To reassemble your device, follow these instructions in reverse order.
