Hair Dryer Grating Replacement

Автор: Mitch
  • Комментарии: 0
Hair Dryer Grating Replacement

Сложность

Moderate

Шаги

4

Необходимое время

Нет оценки

Введение

Инструменты

  1. jXYWKeLalGIRo2ND
    jXYWKeLalGIRo2ND
    niF4mYomOQRFhxWb

    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    • If nozzle is not attached, skip to next step.

  2. ihVDFXJNUNy3D6lH

    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • For most hair dryers, use a Phillips #1 screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 screwdriver.

  3. VMSxyYmMHo2ZWZdJ

    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

  4. ViLGEHJoRRPUnaQY

    • Separate the hair dryer grating into the three pieces seen in the image.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Mitch

Участник c: 04/10/12

34 Репутация

0 комментариев