Введение
Instructions to open the steering wheel assembly to access the motor, gears and motherboard(s).
Инструменты
-
-
Remove 8 screws from the base (two are covered by the sticker), using a TX10 security screwdriver (i.e. with the security hole at the top)
-
-
-
Remove the additional 8 screws from the back of the wheel assembly, again, using the TX10 security screwdriver.
-
Заключение
To reassemble your device, follow these instructions in reverse order. Do not overtorque the screws as they are into a plastic casing and will strip easily.
