Введение

Инструменты

  1. ShvkpSu1Z62nAhWx
    • Slide the battery cable connector out of its system board socket.

    • Pull parallel to the motherboard, not straight up, or you will damage the socket.

    • Remove the screws that secure the battery to the palm-rest assembly.

    • Lift and remove the battery along with its cable.

    • Slide and hold the power switch for about five seconds to ground the system board.

  2. lSHUQgVB5wOAvEid
    • Remove the screw that secures the mSATA card to the system board.

    • Slide and remove the mSATA card out of the mSATA-card connector.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Заключение

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Участник c: 28/02/18

45264 Репутация

0 комментариев