Введение

Инструменты

  1. cTroisAZnuCeWoUJ
    • Remove the screws that secure the base cover to the computer.

  2. hMclTptMlIEg54Er
    • Pry the base cover along the edges to loosen it.

  3. uYSbQrN5WUXTLaf2
    • Lift and remove the base cover from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  4. RLFZFvTNwHTaHwEF
    • Disconnect the battery cable from its connector on the system board.

  5. 1cfDJ1daagF2qoHg
    • Release the tabs that secure the battery in the battery bay.

  6. mxSfNXev5WVJffrq
    • Lift and remove the battery from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  7. uyuhIaOHvpmfGLEq
    • Pry the securing clips away from the memory module until it pops up. Remove the memory module from its connector on the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Заключение

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Участник c: 28/02/18

45264 Репутация

0 комментариев