Введение
-
-
Remove the screws that secure the back cover to the computer.
-
Pry the edges of the back cover from all sides, to release the back cover.
-
Lift the back cover from the computer.
-
-
-
Disconnect the battery cable from the connector on the system board [1].
-
Remove the screws that secure the battery to the computer [2].
-
Lift and remove the battery from the computer [3].
-
-
-
Lift the plastic enclosure covering the top of the memory module compartment.
-
Pull the retention clips from the memory module until it pops up.
-
Remove the memory module from the connector on the system board.
-
Заключение
To reassemble your device, follow these instructions in reverse order.
