DeWalt DW920 Lock Switch Replacement

Автор: Stephen Rada
  • Комментарии: 1
DeWalt DW920 Lock Switch Replacement

Сложность

Moderate

Шаги

2

Необходимое время

15 минут

Введение

  1. 1nHTUJQEHIHMHsTU

    • Locate the switch on the top of the drill right before the bending joint.

  2. vQEBSLuXpCSqBWiA
    vQEBSLuXpCSqBWiA
    Djicja4RsBDWUWQe

    • Firmly grasp the switch with two fingers and lift it straight up. The spring should remain attached to the switch during this process.

    • It should lift right out. If it is caught on anything do not force it out.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Stephen Rada

Участник c: 11/03/16

433 Репутация

Один комментарий

This guide was descriptive and easy to follow. Good job!

DankMemerino -