Введение
Инструменты
-
-
Place the CygoLite on a flat surface with the bottom side facing up.
-
Locate the four screws on the bottom of the device.
-
Unscrew them with a Phillips head screwdriver and remove the bottom casing.
-
-
-
Locate the rubber gasket on the side of the device.
-
Place your new replacement rubber gasket onto the side of the casing and gently place the top of the case back on top of it.
-
Be sure to line up the grooves in the casing with the grooves on the rubber gasket.
-
Заключение
To reassemble your device, follow these instructions in reverse order.
