Canon ImageCLASS MF4350d Remove Right Side Paneling

Автор: Helena Yanez
  • Комментарии: 1
Canon ImageCLASS MF4350d Remove Right Side Paneling

Сложность

Very easy

Шаги

4

Необходимое время

5 минут

Введение

The side paneling is the plastic that protects the inside of the printer. This guide will teach you how to effectively remove the paneling without cracking it.

Инструменты

  1. SaveUCjXXNUmtjrD

    • Lift the printer lid up as shown in the photo.

  2. RIbK4jnc3gmnjZAM
    RIbK4jnc3gmnjZAM
    pXlprey5FgKULsRw

    • Locate and remove the two 10mm side screws. There is one on each side.

  3. WFivXeQ3WA3nAPgO
    WFivXeQ3WA3nAPgO
    FkJybSASTfZLigLN

    • Unhook the plastic panel from the printer starting from the top.

    • You may need to wiggle the panel a bit to loosen it.

    • To remove the bottom part of the paneling gently lay the printer on its back.

    • The scanner lid needs to be supported when moving the printer

  4. pTGWjKO4Bxiqg4Ll
    pTGWjKO4Bxiqg4Ll
    FHWYQWeOiieDTa5Q
    3cchtDe3PiuVdolu

    • Gently unhook the right side paneling (as looking at the printer's front face) from the printer.

    • Use a gentle back and forth motion to wiggle the hooks out.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Helena Yanez

Участник c: 30/09/13

458 Репутация

Один комментарий

Tore paper when removing jamed paper. A small piece of paper must still be in machine.

Louis Pike McCasland -