Bear 1000 Filter Replacement

Автор: Eli Ferman
  • Комментарии: 0
Bear 1000 Filter Replacement

Сложность

Moderate

Шаги

4

Необходимое время

25 минут

Введение

This guide will walk you through the process of replacing the ambient air intake filters in a Bear 1000 Ventilator. Found on page 97 in the full service manual.

Инструменты

    • Turn off the ventilator and disconnect from AC power and pressurized gas at the wall sources.

  2. fM2GDppooJvhq2iM

    • Open the ventilator by removing the console retaining screw.

    • Vacuum all surfaces inside the ventilator. Be sure to reach areas around connectors, circuit boards and pneumatic assembies.

    • Remove old filters in back panel and replace with new ones.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Eli Ferman

Участник c: 08/04/20

607 Репутация

0 комментариев