Base Replacement

Автор: Josh Showalter
  • Комментарии: 0
Base Replacement

Сложность

Moderate

Шаги

2

Необходимое время

5 минут

Введение

This guide shows the steps to replace the parts in the base.

  1. FpowwHuWBO1jDXeG
    FpowwHuWBO1jDXeG
    ytQTv1RfRfgX1BIK

    • Remove the four Phillips #0 screws (9.4mm) located at the bottom of the phone on the back side of the base.

  2. c1jZneNANmHWAWq6

    • Use the spudger to separate the bottom from the top.

    • There are two clips, located top and bottom, that you have to compress with the spudger.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Josh Showalter

Участник c: 08/02/16

442 Репутация

0 комментариев