Введение

In this prerequisite guide, we will remove the 4 screws on the bottom of the base. Then we will remove the gray cover from the base.

  1. gXRjEPtCFOKUTVTX
    • Take out the three 15 mm Phillips #1 screws.

    • Remove the 15mm T10 screw.

    • Place the 4 screws on the magnetic mat.

  2. Mhwa2IgpN1lSw2PV
    • Remove the gray base by lifting upwards and placing to the side.

Заключение

To reassemble your device, follow these instructions in reverse order.

Devin Poulin

Участник c: 20/01/16

341 Репутация

0 комментариев