Anbernic RG 40XXV Back Panel Assembly Replacement

Автор: Kristen Gismondi
  • Комментарии: 0
Anbernic RG 40XXV Back Panel Assembly Replacement

Сложность

Moderate

Шаги

3

Необходимое время

Нет оценки

Введение

  1. YRwpEDdnIb4X3BCx
    YRwpEDdnIb4X3BCx
    Ms6EGxbvhDpmacZX
    NwkxORvm53JiPXKc

    • Remove the micro SD card located on the left and right sides of the device by pushing into the SD card slot and pulling the card out.

    • Unscrew all six 7.5 mm screws on the backside of the case using a 1.5 mm hex screwdriver.

  2. xonZ1HVsxZuONLDm
    xonZ1HVsxZuONLDm
    TWTqNLro5qWipheZ

    • Take apart the case by separating the front and back sides using an iFixit opening tool.

    • When using the opening tool, carefully pry open the case to avoid damaging the device.

  3. e5U26GNK3MWYa6uj
    e5U26GNK3MWYa6uj
    pH1HqHOFF5g4vBOW

    • Disconnect the battery connection cable by gently pulling it away with angled tweezers from the slot that connects the cable to the motherboard.

    • The cable connection to the motherboard is labeled "+BAT-" for easy identification.

Заключение

To reassemble your device, follow these instructions in reverse order.

Автор

Kristen Gismondi

Участник c: 12/11/14

95031 Репутация

0 комментариев