Введение
If you find that your headlight bulb isn't emitting light, start by ensuring it's properly connected. Follow steps 1-3 in this guide to check. If it's connected correctly and still not working, it may need replacement.
This guide demonstrates how to replace it specifically for a 2018 Jeep Wrangler. Before you begin, remember to switch off your car and headlights.
Запчасти
-
-
Locate the headlight connector. It's a plastic piece attached to the back of the headlight bulb.
-
-
-
Carefully pull the headlight out from its socket. Hold the base of the bulb and gently pull straight back.
-
-
-
Unplug the old headlight from the connector. It should come off easily by pulling it away from the connector.
-
-
-
Place a new headlight into the connector where you removed the old one. Make sure it's properly aligned.
-
-
-
Insert the new headlight back into the headlight socket. Push it in until it's snug and secure.
-
To reassemble your device, follow these instructions in reverse order.
